What you are looking for?

  • Can I become a member of the Marker test team?

    Our bindings are not exclusively tested by the research team, for product testing we also send out members of our pro team or local opinion leaders. If you want to become a member of our test team, you better join the local ski club! If you are good enough for the team, let us know...

  • How do I store my skis & bindings correctly in summer time?

    You should turn down the Z-number (DIN/ISO) of your binding to the minimum setting to relieve the spring. Attention: a specialist must adjust the binding before you ski again! It is also good for the binding to grease it slightly with a spray to help protect it from corrosion. Check with your local Marker dealer for the best advise and for the necessary materials to keep your bindings working like new.

  • How often do I have to re-check the adjustment of my binding?

    You should have the binding adjustment re-checked after three weeks of use, and at least once a winter season. Also, it is important to readjust the settings if there are any changes to you physically or to any of your system parts: ski, boot, and binding.

  • What is a system?

    For a skier, it is important to have a system of ski boot and binding that fit together as a functional unit. The better the components fit together, the better the quality of the skiing experience. The philosophy of MARKER is to build the best possible systems and components. To achieve this goal we work intensely with our ski partners—both in the lab and in the snow. For more information visit:

    www.voelkl.com
    www.k2skis.com
    www.nordica.com
    www.blizzard-ski.com
    www.kneissl.com
    www.dalbello.it

  • Where do I mount the binding on the ski?

    On most skis a recommended boot center line is indicated by the ski manufacturer. It is also possible to mount the binding in a position closer to the tip or the end of the ski. If the ski is mounted more to the tip, it will turn easier, if it is mounted towards the end, the ski will act more solid at high speed. In every case however, you must go to an authorized Marker dealer to have it mounted in the correct way.

Your favorites

+

Product was added to your favorites. Show favorites