VOLUNTARY SAFETY RECALL
(July 2018)
This voluntary Recall is limited to 2017-2018 Kingpin models. Sales of some models of recalled bindings began in 2017 and some in 2018. Only the toe part of the bindings needs to be replaced.
These bindings are being recalled because the Pin in the toe part can break under rare circumstances. This can result in reduced release/retention and leads to fall hazard.

Affected Bindings
Affected are all Kingpin models with a new Marker Logo on the toe part and a golden or copper colour.
7733R1MA | KINGPIN 10; 75 - 100 mm | gold |
7733R1MB | KINGPIN 10; 100 - 125 mm | gold |
7933R1MA | KINGPIN 13; 75 - 100 mm | gold |
7734R1MA | KINGPIN 10 Demo; 75 - 100 mm | gold |
7934R1MB | KINGPIN 13 Demo; 100 - 125 mm | gold |
7933R1MB | KINGPIN 13; 100 - 125 mm | gold |
7733S1MA | KINGPIN 10; 75 - 100 mm | copper |
7733S1MB | KINGPIN 10; 100 - 125 mm | copper |
7933S1MA | KINGPIN 13; 75 - 100 mm | copper |
7933S1MB | KINGPIN 13; 100 - 125 mm | copper |
7734S1MA | KINGPIN 10 Demo; 75 - 100 mm | copper |
7934S1MB | KINGPIN 13 Demo; 100 - 125 mm | copper |
Affected models
Following 2017-2018 models are affected
IDENTIFY THE MARKER LOGO ON THE TOE PART
Other graphic renditions are NOT affected by this recall!
Additional identification
With this serial number on the heel you are able to find out if your binding is affected or not. If your serial number is in between this range you should replace the toe part.

Kingpin 10
-> 337804 – 418632
Kingpin 13
-> 337798 – 411728
What should I do?
Check with Marker or your Marker Authorized Retailer for details.
Stop using these bindings and return them to a Marker Authorized Retailer to determine if they are covered by this recall.
Toe pieces of recalled bindings will be replaced at no charge.
Skiers should bring their boots to be sure their bindings are adjusted correctly for their boots.